MICROSONIC specializes in ultrasonic sensors for non-contact fill or level measurement, when used for chemically aggressive liquids or solids. Sensors are built in SS, with a PTFE film coat, are pressure resistant and with very high corrosion resistance. Hence they allow for reliable functioning in highly corrosive environments. For Food & Pharma applications, a specially designed stainless steel housing without any crevices, allows for repeated intensive wash downs and disinfection, while maintaining sensor performance.
VARIANT 1SERIES : pico+TF crm+ hps+Stainless steel or PVDF body sensors for use under normal or high pressure (up to 6 Bar) With MICROSONIC Teach-In and synchronization.•Body sleeve size of M22/M30 with integrated plug connection or G1 connection•Detection range of 30mm to 8000mm maximum•Output switch type options of 1 x pnp/npn, 2 x pnp/npn, Analogue 4-20mA / 0-10V outputs •IO Link is an additional option for the pico+TF & crm+ series•Ingress protection ratings of up to IP67 as per IEC EN 60529•Operating voltage range of 9V - 30V DC with reverse polarity protection•Internal temperature drift compensation •Stainless steel body and cable type connections on request•CE certified
CHEMICAL AND HYGIENIC SENSORS
VARIANT 2SERIES : pmsStainless steel body sensors with four different detection ranges and multi operation modes. With Teach-In and improved temperature compensation. Uses FDA compliant materials.•Innovative housing design with PTFE coating for ultra clean environments, EHEDG & ECOLAB certified•Detection range of 20mm to 1300mm maximum•Output switch type options of 1xpnp/npn or Analogue 4-20mA / 0-10V outputs •IO Link option•Ingress protection ratings of up to IP68 as per IEC EN 60529•Operating voltage range of 10V - 30V DC with reverse polarity protection•Internal temperature drift compensation •Typically built for food and pharma industries•CE certified
*Refer to manufacturer data sheet for detailed technical evaluation and installation/operation instructions